MFMaster Finish · NSW & ACT
Commercial & Industrial Epoxy Flooring
Seamless epoxy, PU cement and concrete floor systems for warehouses, workshops, commercial kitchens and industrial sites. Prepared properly and built for how your site actually works.
- Industry experience
- 30+ yrs
- Largest single site
- 2,000 m²+
- Service area
- NSW & ACT
- Public liability
- Insured
01Approach
Floors built for how your site actually works.
Commercial floors fail when the system doesn’t suit the site. Forklifts, hot-water washdowns, chemical spills and constant foot traffic each need a different approach.
We look at how the floor will be used, check the condition of the concrete, and specify a system that suits those conditions. We don’t sell one coating for every job.
02Services
Flooring systems
Resin, PU cement and concrete floor systems for commercial and industrial sites across NSW and the ACT.
- 01Commercial & Industrial EpoxySeamless, easy-clean resin floors for commercial and industrial spaces.
- 02Warehouse FlooringCoatings and line marking for forklift and pallet traffic.
- 03Heavy-Duty IndustrialHigh-build systems for impact, abrasion and chemicals.
- 04Commercial Kitchen PU CementHeat- and washdown-resistant floors with coved skirting.
- 05Cold Room FlooringSystems suited to low-temperature and freezer environments.
- 06Concrete PolishingGround and polished concrete for low-maintenance floors.
- 07Concrete Floor MaintenanceCrack, joint and surface repairs that extend floor life.
- 08Decorative SpraycreteTextured finishes for paths, driveways and entries.
- 09Decorative Flake FlooringHard-wearing flake finishes for amenities and showrooms.
03Featured project
RepairHub, Banksmeadow
Over 2,000 m² of two-tone epoxy flooring for RepairHub’s Banksmeadow facility. Blue work areas and light-grey zones give a bright, reflective floor that marks areas clearly across the building.
- Area
- 2,000 m²+
- Sector
- Automotive repair
- System
- Two-tone epoxy
- Engaged
- Directly by client
04Industries
Where our floors work
05Why Master Finish
What builders and facility managers get
Preparation first
Most coating failures come from poor preparation. We grind, repair defects and deal with moisture before we coat.
The right system
We specify based on traffic, chemicals, temperature and cleaning, not on what's easiest to sell.
Large-area capability
We deliver large commercial floors, including the 2,000 m²+ RepairHub facility.
Insured, safety-conscious
Public liability insured, and we work to site safety requirements.
06Process
How a project runs
- 01
Inspect
We check the concrete, moisture, cracks, joints and existing coatings, and confirm how the floor will be used.
- 02
Prepare
Diamond grinding or mechanical preparation, then crack, joint and defect repairs. Most coating failures start here.
- 03
Install
Primer, body and top coats for the specified system, with coving, line marking or colour zones built in.
- 04
Hand over
Correct cure time before traffic returns, plus care and cleaning guidance.
→Next step
Let's talk about your floor.
Send us the floor area, location and current condition. Photos or plans help us quote accurately.